EN 中文

Excavation edge guardrail

Edge protection for open excavations, basement pits and slab edges. The family covers two models: a lighter mesh-panel / vertical-tube guardrail on a common 50 × 50 mm square-tube post, and a heavier double-panel or single-panel vertical-tube guardrail on an 8 cm square-tube post with a bolted base flange — choose by how much traffic and load the pit edge carries. Both use a yellow-black warning treatment.

Excavation edge guardrail in mesh-panel type with yellow-black warning finish, front view

Excavation edge guardrail — mesh-panel and vertical-tube types

Mesh panel outer frame 20 × 30 / 30 × 30 mm Mesh opening 50 × 50 mm Vertical-tube outer frame 30 × 30 mm Post 50 × 50 mm square tube

Mesh-panel type Vertical-tube type 50 × 50 mm posts Yellow-black warning finish Excavation edges Slab edges

Both versions of this guardrail share the same 50 × 50 mm square-tube post, so a site can run one post line and change the panel type along it. The mesh-panel type uses a 20 × 30 mm or 30 × 30 mm square-tube outer frame around 50 × 50 mm mesh, which keeps the panel light enough for one person to lift into position while still closing the opening against materials and debris. The vertical-tube type uses a 30 × 30 mm outer frame with vertical tubes, with a cleaner face where the barrier is in public view. The family also includes the heavier double-panel and single-panel vertical-tube variant, whose figures are the second group in the table below: an 8 cm square-tube post on a bolted base flange, for pit edges that carry site traffic or need a braced, movable line.

  • Mesh-panel type: outer frame 20 × 30 mm or 30 × 30 mm square tube, mesh opening 50 × 50 mm.
  • Vertical-tube type: outer frame 30 × 30 mm square tube with vertical tube infill.
  • Common post: 50 × 50 mm square tube, used with either panel type on the same line.
  • Warning finish: yellow-black, applied to the specified panels and posts for edge visibility.
  • Typical use: excavation edges, basement pits and slab edges on building and civil sites.
  • Panel length, panel height, post spacing and the fixing method are confirmed against the site drawing.
  • Guardrail positions, toe boards and access openings for a working excavation are set by the project's own safety plan; ask us to supply to your drawing rather than to a default layout.
Full specification

Excavation edge guardrail — specification summary

Reference values for both variants of this guardrail: variant A, the general mesh-panel / vertical-tube range on a 50 × 50 mm square-tube post, and variant B, the double-panel / single-panel vertical-tube guardrail specified on this page. Panel length, panel height, post spacing and base fixing are confirmed against an approved shop drawing for each order.

Specifications
Product / familyExcavation edge guardrail, supplied in two variants: variant A, the general mesh-panel / vertical-tube range; variant B, the double-panel / single-panel vertical-tube guardrail specified on this page. Figures are listed per variant below.
Variant A — mesh-panel and vertical-tube guardrail (general range)Mesh-panel type: outer frame 20 × 30 mm or 30 × 30 mm square tube with 50 × 50 mm mesh openings. Vertical-tube type: outer frame 30 × 30 mm square tube with vertical tube infill. Common post for both types: 50 × 50 mm square tube.
Variant B — double-panel / single-panel vertical-tube guardrail (as specified on our product page)Movable or fixed guardrail: panel welded from 2 cm × 4 cm square tube, single panel 1.1 m × 1.7 m, on an 8 cm square-tube post 1.3 m high with an 8 mm × 15 cm × 15 cm base flange, panel mesh 50 × 50 mm, wire diameter 3.5 mm, single leaf 1800 × 700 mm.
Variant B — panel construction and sizePanel welded from 2 cm × 4 cm square tube; single panel size 1.1 m × 1.7 m; a movable and a fixed version are supplied, and the two share the same panel and post dimensions.
Variant B — lug and bolt detailEach panel has lugs at both ends, bolted to the post with Φ10 bolts; the lug sits 15 cm from the top and bottom edge of the panel.
Variant B — post section and heightPost 8 cm square tube, height 1.3 m; the post top is closed.
Variant B — base flangeBase flange of 8 mm × 15 cm × 15 cm steel plate; each flange has 4 bolt holes.
Variant B — ground fixing boltThe flange is fixed to the ground with Φ14 expansion bolts.
Variant B — installation height and post spacingAfter installation the panel top is flush with the post; the panel bottom is 20 cm above ground level; post spacing 2 m.
Variant B — panel mesh50 × 50 mm.
Variant B — wire diameter3.5 mm.
Variant B — surface treatmentSpray painting.
Variant B — colour optionsPanel painted yellow and post painted red, both by spray painting, to give a red-and-white / yellow-and-black warning effect. Colours available: yellow-and-black alternating, red-and-white alternating, or made to order.
Variant B — single-leaf size1800 × 700 mm — the standard single-leaf size quoted by the manufacturer.
Variant B — expanded mesh and steel plateExpanded steel mesh 30 × 40 × 2.0 mm; steel plate 1.0 m.
Variant B — load capacityAbout 600 kg.
Variant B — movable vs fixed versionBoth versions are made and share the same dimensions; the movable type adds a 20 cm triangular brace at its two fixing points, in 8 cm square tube.
Variant B — quantity examplesQuantities printed by the manufacturer as installation examples: movable double-panel version 100 m; fixed version 1361 m — the same figures appear for the single-panel and site-enclosure variants.
Cited site rule (both variants)Excavation edges of pits deeper than 2 m must be fitted with protective railings; stairway width should not be less than 1 m.
PackingPanels and posts are bundled and palletised for container loading; the exact packing method is confirmed per specification with the loading plan.
PricePrice: quoted per order — FOB Wuhan / Shanghai, CIF or DDP
MOQConfirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day.
LoadingConfirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day.
Lead timeConfirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day.
DocumentationProforma invoice, commercial invoice, packing list and certificate of origin as required. Buyers who need CE / EN / ASTM documentation: tell us the standard and we will confirm in writing what we can supply.
Packing & shipping

How excavation edge guardrail reaches your site

Knocked-down panels and posts, packed so the first delivery on site can be erected as it is unpacked.

Two choices are settled before we pack: whether the run is movable or fixed, and whether the movable panels carry braces. The movable and fixed versions share the same panel and post dimensions; the movable type adds a 20 cm triangular brace in 8 cm square tube at each of its two fixing points. Tell us which version the site needs and we quote the matching panel, post and accessory list.

Export packing

Mesh panels and posts are stacked face to face, edge-protected and bundled, with the fixing accessories in a labelled bag on the bundle. Bundles are marked with the panel type, the post length and the drawing reference, and the packing method is confirmed per specification on the packing list.

Loading plan

Confirmed per specification — send the drawing, quantity and destination port and we reply with MOQ, loading plan and lead time within one business day. Because the panels and posts nest, the plan is normally driven by bundle count and weight rather than by volume; tell us the container size and we confirm the arrangement.

Documents & terms

We issue the proforma invoice, commercial invoice, packing list and certificate of origin. Documentation against a named standard is confirmed in writing per order. Payment terms and warranty are agreed per order and stated on the proforma invoice.

Related products

Usually quoted with excavation edge guardrail

Range of safety guardrails and railings for construction sites

Guardrails & Railings

The full guardrail family: excavation edge guardrail, zinc-steel perimeter railing, road guardrail, PVC railing, movable barrier, slab-edge guardrail, crowd-control barrier and planter railing.

View range
Double-wire mesh fence panels fixed to round posts

Double-Wire Mesh Fence

Double horizontal wires with a single vertical wire in square or rectangular mesh, on round or square posts, hot-dip galvanised or PVC dipped.

View product

Send us the pit drawing and we will quote the guardrail run

Tell us the excavation or pit dimensions, the panel type you prefer, the post fixing and the destination port. We reply within one business day with the panel and post quantities, the accessories list and the packing plan.